How to decorate the wiring of fiber-optic households

In order to satisfy your high-speed Internet access, video, entertainment, mythology, etc. anywhere in your residence, the basic method of home network wiring recommended for home decoration is:
The home information box or network convergence point should not be set in a wet and greasy position, and try to choose a device in the home wireless coverage.
In order to facilitate Internet access in different directions, each room and function area in the residence should have five types of line-to-home information boxes or network convergence points, and separate from the device network cable sockets to form a home LAN, and then complete resource sharing.
All the places in the residence that need to install the TV should be equipped with a network cable socket, and a separate Category 5 cable to the home information box or network convergence point, and then each TV can watch the IPTV program.
The living room, bedroom, and study room should be equipped with telephone sockets; telephone sockets can be set up in the bathroom and kitchen according to requirements. Each telephone socket should be separated from the telephone line to the family information box or network convergence point. The height of the box device of each socket: the bathroom, the kitchen is 1000-1300 mm from the floor, and the other parts are 300 mm from the floor. Based on the above basic methods of home network cabling, the following three different scenarios of home wiring are available for your reference:
Scenario 1: The developer has used the home information box structure scale or the larger standard family information box recommended by the telecommunications.

The FTTH network terminal and the home network equipment are installed in the home information box; the telephone line and the five types of lines in the residence are selected by the star wiring method, and are gathered into the home information box; if you prefer to use the wireless Internet, please use the wireless AP device orientation. Lay a Category 5 cable to the home information box and supply it to the power outlet (powering the wireless AP device).
Scenario 2: The scale of the family information box of the device when the developer delivers the house cannot meet the requirements or can not use the current family information box for other reasons, and you can install a telecom in other directions (such as the study room) during decoration. Recommended family information box structure scale or larger standard family information box.
The FTTH network terminal and the home network equipment are installed in the new home information box; the telephone line and the five types of lines in the residence are selected by the star wiring method, and are gathered into the home information box; if you prefer to use wireless Internet access, please go from the wireless The AP device orientation lays a Category 5 cable to the home information box and supplies it to the power outlet (powering the wireless AP device).
Under normal circumstances, the household optical cable has been put into the original family information box, so you need to pre-embed a dark tube with a diameter of not less than 20mm between the two family information boxes during decoration, and at least put it in the tube. A five-category line, when the dark pipe is laid, please do not directly bend, pipe damage and blockage.
Scenario 3: The existing family information box structure in the residence is not satisfactory, and the telephone line and Category 5 line in your residence have already gathered in the family information box, but you are not willing to replace the family information when you are in the second decoration. box.
In general, the FTTH network terminal and the home network device are installed on the cabinet near the existing home information box (the power socket, the device device orientation, and the home optical cable are placed there).